65 Series Marine Flush Mount


Marine Carbon Monoxide Alarm Flush Mount

Clear Selection
SKU: M-65-542 Category:

65 Series Marine Flush Mount – Marine Carbon Monoxide Alarms Features

  • This item is temporarily out of stock with an estimated 6-8 week backorder. Part number 62-542-TR is an alternate unit that is currently in stock. Note: the 62 series is smaller and has an approximate footprint of a credit card and will not cover previous screw holes.
  • NMMA Listed Component.
  • Works in extreme temperatures. Only marine CO alarm listed to operational temperatures of -40°F to 158°F. The alarm has consistently held up in the excessive cold and heat due to the high-quality sensors.
  • No False Alarms due to new boat smell, outgassing, or non-hazardous levels of hydrocarbon gases encountered while boating. Interconnect and generator shut-off alarms are available.
  • Low Current Draw. An innovative micro-current circuit saves battery power for the boater. Alarm Mute with Auto Reset. With a press of a button, the mute circuit will temporarily silence the alarm while the boater ventilates the cabin. The alarm will reactivate if it still senses dangerous levels of CO.
  • End of Life Signal. Alerts boater to replace the alarm after 5 years of service.
  • Memory Scan. Retains the CO level that activated the alarm. After ventilation, it is impossible to know what the CO level was unless the detector has memory.

Download Manual

65 Series Marine Flush Mount Operating Specifications

  • Conforms To ANSI / UL STD 2034*
  • * Testing Laboratory: ETL/Intertek
  • Alarm Point: 400 PPM 4-15 Minutes
  • Low voltage power warning at 7 Volts
  • Power Supply and Current Draw: 108 mA @ 12 VDC
  • Operational Range: 12 Volts +/-15%
  • Low voltage power warning at 7 Volts
  • Operating Temperature: -40°F to +158°F

Where to Install Boat